Siemens Gigaset Gigaset S1 Page 28 Operating Manual Download

Page: 28 / 110

Step by Step

Setting the handset

• Tones: 1 to 3 (recommended for internal calls)

• Melodies: 4 to 10 (recommended for external calls

with Gigaset S1 professional)

• Melodies: 4 to 26 (recommended for external calls

with Gigaset SL 1 professional)

either:

Save the settings.

or: Setting the time control for the ringer

You can select a different ringer volume for a specific

length of time in this menu (e.g. during the night).

Call the ringer time control menu.

Fix the setting.

Move the cursor down one line.

...

Save the time control settings.

Save the ringer settings.

Press and hold the On-hook key to end the process.

Please make sure that you have picked up the call

before holding the phone to your ear. This is to

ensure that the loud ringing tone does not cause

damage to your hearing.

Save

Note:

Please take account of the special features of

the handset‘s internal clock (

page 26).

Save

1 Time control status

2 Start of the time

frame

3 End of the time

frame

Time ctrl::

From:

Until:

00:00

Time C.

Save

Summary of Contents for Gigaset Gigaset S1















































































































Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands

Siemens Gigaset Gigaset S1, Operating Manual

Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands