Siemens Gigaset Gigaset S1 Page 17 Operating Manual Download

Page: 17 / 110

Conducting calls – the basic functions

Step by Step

Activating or deactivating the keypad
lock

This feature protects against accidentally pressing but-

tons when the handset is in a pocket, for example. The

keypad lock turns off automatically when a call comes

in and turns back on when the call has ended.

Press the hash key until the activation or deactivation is

confirmed by a crescendo tone sequence.

A key icon on the display indicates that keypad lock is

active.

Leaving the radio network

After leaving the radio network

The base name flashes on the display. The handset re-

peatedly attempts to synchronise with a base. The in-

tervals between synchronisation attempts increase on

account of the integrated power saving function.

You can switch off your handset to save the battery. The

date and time settings will be lost (

page 26).

Summary of Contents for Gigaset Gigaset S1















































































































Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands

Siemens Gigaset Gigaset S1, Operating Manual

Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands