Siemens Gigaset Gigaset S1 Page 30 Operating Manual Download

Page: 30 / 110

Step by Step

Setting the handset

Setting the ringer echo

This function enables you to set the tone quality for the

longer melodies (4 to 10). When ringer echo is activat-

ed, melodies will be played with an echo.

Open the main menu of the handset.

[

Select and confirm the menu item.

[

Select and confirm the menu item.
Ringer echo is activated.

The activated function is ticked. It can be deactivated by

selecting the option once more.

Press and hold the On-hook key to end the process.

Activating and deactivating silent alert

In Gigaset SL 1 professional. you can activate the silent

alert feature in addition to ringer settings or else instead

of ringer settings.

You can deactivate the ringer settings once you have ac-

tivated the silent alert (

page 25).

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.
Silent alert is active.

The activated function is ticked and can be deactivated

by selecting it once more.

Audio Settings

Ringer Echo

Audio Settings

Silent alert

Note

If you have called up the Service menu, then si-

lent alert will not be activated for an incoming

call if "Turn ring off" and "Silent alert (on)" have

been set.

Summary of Contents for Gigaset Gigaset S1















































































































Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands

Siemens Gigaset Gigaset S1, Operating Manual

Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands