Siemens Gigaset Gigaset S1 Page 43 Operating Manual Download

Page: 43 / 110

Conducting calls – enhanced functions

Step by Step

[

Select and confirm the menu item. Automatic redial is

activated.

either:

The user answers and you conduct the call.

or:

If you wish to cancel the function: press the Display key

or any key.

Deleting a phone number from the redial list

Call the redial list.

Press the top or bottom of the control key to select the

required phone number.

Open the menu.

[

Select and confirm the menu item. The telephone

number is deleted.

Press and hold the On-hook key to end the process.

Adding a telephone number to the redial list

Call the redial list.

Press the top or bottom of the control key to select the

required phone number.

Open the menu.

[

Select and confirm the menu item. The telephone

number is deleted.

Enter the name (max. 16 characters), change the phone

number is necessary and enter the date.

Open the menu.

[

Save the entry.

Press and hold the On-hook key to end the process.

Automatic Redial

Off

Delete Entry

Copy to Directory

Save Entry

Summary of Contents for Gigaset Gigaset S1















































































































Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands

Siemens Gigaset Gigaset S1, Operating Manual

Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands