Siemens Gigaset Gigaset S1 Page 85 Operating Manual Download

Page: 85 / 110

Message functions

Step by Step

Answering a message or voice-mail
message

An advisory message appears when you have received

a message or voice mail.

Viewing a new message

either:

Press the message key.

or:

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> [

Select the required message and confirm your selec-

tion.

continue:

Call the additional menu.

> <

[

Select and confirm the menu item.

Call the additional menu.

> <

[

Select and confirm the menu item. The time of the

message is displayed.

either:

Call the additional menu.

> <

[

Select and confirm the menu item. You call back the

sender.

or:

> <

[

Select and confirm the menu item. The entry is deleted.

continue:

Press the On-hook key to end the process.

You have new mes-
sages received

Messages received

Menu

Display Messages?

Msg. from:

Mnu

Text?

Mnu

Time/date sent?

Mnu

Call Sender?

Delete?

Summary of Contents for Gigaset Gigaset S1















































































































Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands

Siemens Gigaset Gigaset S1, Operating Manual

Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands