Siemens Gigaset Gigaset S1 Page 16 Operating Manual Download

Page: 16 / 110

Step by Step

Conducting calls – the basic functions

either:

> <

[

Select and confirm the menu item.

or:

> <

[

Select and confirm the menu item.

or:

> <

[

Select and confirm the menu item.

continue:

Enter the destination phone number.

Save the settings.

Press the On-hook key to end the process.

Deactivating call forwarding

Prerequisite:

The room monitor function is activated.

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

Press the On-hook key to end the process.

1=all calls?

2=external
calls only?

3=internal
calls only?

Save

Note:

The external code must be entered before ex-

ternal phone numbers.

If the service engineer has activated DTMF DID,

you can also forward calls to these external

phone numbers.

Menu

Divert cancelled?

Summary of Contents for Gigaset Gigaset S1















































































































Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands

Siemens Gigaset Gigaset S1, Operating Manual

Search results

Summary of Contents for Gigaset Gigaset S1

Reviews:

Related manuals for Gigaset Gigaset S1

Brands by name

Popular brands