62
Making calls using network services
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / netservices.fm / 31.08.10
V
e
rsion 4, 16.0
9
.2005
Activating/deactivating call waiting
Prerequisite for calls via VoIP:
At least two
parallel VoIP connections are permitted on
your telephone (setting can be changed via
the Web configurator).
v
¢
Ç
Select Services
¢
Call Waiting
Status
Select
On
/
Off
to activate/deac-
tivate call waiting.
¤
Press the display key
§Save§
.
Call waiting is activated/deactivated for all
connections to the telephone and all regis-
tered devices.
If the base is connected to the analogue
fixed line, it establishes a connection to the
exchange to send a corresponding code.
¤
After confirmation from the fixed line,
press the red end key
T
.
Special settings for calls via VoIP
or ISDN
Prerequisite:
Your telephone is connected
to the ISDN network.
Activating/deactivating transfer –
ECT (Explicit Call Transfer)
If the
Transfer (ECT)
function is activated,
you can connect two external callers with
one another by replacing the receiver or
pressing the red end key
T
. This assumes that you are
making an external call via one of your VoIP
or ISDN connections and start an external
consultation call.
You can activate/deactivate this function for
ISDN calls via your base.
v
¢
Ç
Select Services
Transfer (ECT)
Select and press
§OK§
(
³
= on).
Setting up a busy signal for when the
MSN is being used (Busy on Busy)
If this function is activated, callers immedi-
ately hear the busy tone if an external call
is already in progress via the called MSN
or VoIP connection. The waiting call is
not signalled, regardless of the setting for
Call Waiting
.
v
¢
Ç
Select Services
Busy on Busy
Select and press
§OK§
(
³
= on).
Special settings for calls via the
analogue fixed line
Prerequisite:
The base is connected to the
analogue fixed line.
Fixed destination call
If you pick up the receiver or press the
handsfree key
d
, the number stored is
dialled automatically after five seconds with-
out having to press a button.
v
¢
Ç
Select Services
¢
Fixed Destination Call
¤
You can enter data in the following fields:
Phone Number:
Enter the phone number.
Status:
Activate/deactivate function.
§OK§
Press the display key to send a
specific code to the exchange.
¤
After confirmation from the telephone
network, press the red end key
T
.
Please note
The transfer of the call by replacing the
receiver is not supported by all ISDN pro-
viders and PABXs.
Please note
For your VoIP connections you can set
the transfer via the Web configurator
(see operating instructions for the
Web configurator on the enclosed CD;
Call Transfer).
