138
Configuring the system settings
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / settings.fm / 31.08.10
V
e
rsion 4, 16.0
9
.2005
The Gigaset.net connection is not included
in the selection for the send connections.
Gigaset.net numbers (suffix #9) are automat-
ically dialled via Gigaset.net.
Assigning receive connections
Prerequisite:
Several connections are con-
figured for your base.
v
¢
Ï
Settings
¢
Telephony
¢
Receive Connections
A list of the internal parties (base, handsets,
local answering machines, fax machine INT8
– where applicable) is displayed.
q
Select the internal parties that
should be assigned new receive
connections and press the dis-
play key
§OK§
.
A list of all configured connections and the
Gigaset.net connection is opened. You can
select
Yes
or
No
for each connection.
r
Select
Yes
if you want the rele-
vant connection to be the
receive connection for the inter-
nal party.Select
No
if it should
not be the receive connection.
s
Change to the next connection.
¤
Repeat these two steps for each connec-
tion.
¤
Press the display key
§Save§
to save the
changes.
Further information on how to assign
receive connections to local answering
machines can be found on
.
Please note
If the send connection for an internal
party is deleted or deactivated, then
depending on the connection, that party
is assigned either the fixed line connec-
tion or the first ISDN MSN in the configu-
ration as the send connection.
If the base is connected to the ISDN and
no MSN has been configured, the inter-
nal party is assigned the main number
for the ISDN connection.
Making calls via Bluetooth GSM
connection
If you wish to make a call from the base via
the GSM connection of a mobile connected
to the phone via Bluetooth, you must select
either the GSM connection or
Select at each
call
as the send connection.
For the GSM connection, the name of the
mobile that is currently/was last connected
to the base is displayed in the list of known
devices. When selecting the send connec-
tion, the name of the currently connected
mobile is displayed.
The same applies if you wish to establish
GSM connections via a handset registered to
the base.
Please note
u
If a new connection is configured, it is
assigned as the receive connection to
all internal parties and answering
machine 1.
u
If a connection is not assigned as the
receive connection to any internal
party, calls on this connection will not
be signalled.
Accepting calls to a Bluetooth GSM
connection
If you wish to accept calls on the base that
are made to the GSM connection of a mobile
connected to that base via Bluetooth, then
you must select the GSM connection as the
receive connection. The name of the mobile
is displayed for the GSM connection in the
list of known devices.
The same applies if you wish to accept calls
via the GSM connection to a handset regis-
tered on the base.
