Siemens Gigaset A580 User Manual Download

Page: 112 / 197

111

Setting the phone with the PC

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 28.04.2009

ion 8,

.09

.200

Area:

General Provider Data

If you have downloaded the general settings for the VoIP provider from the

Gigaset configuration server (

Page 108

), then the fields in this area will be

preset with the data from the download. Generally, you do not need to config-

ure any settings in this area.

Domain

Specify the last part of your SIP address (URI) here (maximum 74 characters).

Proxy server address

The SIP proxy is your VoIP provider's gateway server. Enter the IP address or the

(fully-qualified) DNS name of your SIP proxy server (maximum 74 characters).

Example:

myprovider.com.

Proxy server port

Enter the number of the communication port that the SIP proxy uses to send

and receive signaling data (SIP port).
Port 5060 is used by most VoIP providers.

Registrar server

Enter the (fully-qualified) DNS name or the IP address of the registrar server

(maximum 74 characters).
The registrar is needed when the phone is registered. It assigns the public IP

address/port number to your SIP address (

Username@Domain

) used by the

phone to log in. With most VoIP providers, the registrar server is identical to the

SIP server.

Example:

reg.myprovider.com.

Registrar server port

Enter the communication port used in the registrar. Usually, port 5060 is used.

Registration refresh time

Enter the time intervals at which the phone should repeat the registration with

the VoIP server (SIP proxy) (a request will be sent to establish a session). The

repeat is required so that the entry of the phone in the tables of the SIP proxy

is retained and the phone can therefore be reached. The repeat will be carried

out for all activated VoIP phone numbers.
The default is 180 seconds.
If you enter 0 seconds, the registration will not be repeated periodically.

Area:

Network

Example

For the SIP address "[email protected]", enter "provider.com" in

Domain

Please note

If you have downloaded the general settings for your VoIP provider from the

Gigaset configuration server (

Page 109

), then some fields in this area will

be preset with the data from the download (e.g. the settings for the STUN

server and outbound proxy).

Summary of Contents for Gigaset A580






































































































































































































Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands

Siemens Gigaset A580, User Manual

Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands