Siemens Gigaset A580 User Manual Download

Page: 91 / 197

Making VoIP settings on the handset

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 28.04.2009

ion 8,

.09

.200

If only one provider is available, the countries and providers lists are not dis-

played. Only the name of this provider will then appear in the display. To start

the download, confirm with

§OK§

If your VoIP provider is not included in the list, you need to enter or adjust the

general VoIP settings manually via your phone's Web configurator,

Page 107

Automatic update for the VoIP provider settings

After the first download of the VoIP provider settings, your phone will check

daily whether a newer version of the file for your VoIP provider is available via

the Internet on the Gigaset configuration server. If this is the case, the message

New profile available

is displayed when the handset is in idle status, and the Mes-

sage key

flashes.

Press the Message key.

§Yes§

Press the Display key to confirm the prompt.

Enter the system PIN and press

§OK§

The new data for your VoIP provider will be downloaded and saved on the

phone.

If you respond to the prompt with

§No§

, the display will not be repeated. The

message

New profile available

will only be shown again if a newer version of the

VoIP settings than the one rejected is available.

Entering/changing VoIP user data

You must complete the VoIP settings with your personal data. You will receive

all necessary data from your VoIP provider.

§Menu§

Settings

Base

Telephony

VoIP

Enter the system PIN and press

§OK§

Username

Authentication Name

Authentication Password

Select and press

§OK§

one after the other.

Enter/change the user data and press

§OK§

When making these entries, please remember the VoIP user data is

case sensitive. To enter text

Page 152

Enter the caller ID for your VoIP provider account as the

Username

. The

User-

name

is usually identical to your Internet phone number (the first part of your

SIP address

Page 110

For

Authentication Name

and

Authentication Password

enter the provider-depend-

ent access data that has to be transferred by the phone to the SIP service at reg-

istration.

Please note

If an error occurs during the download, an error message is displayed. You can

find possible messages and measures in the table on

Page 141

Please note

A previously set password is not displayed.

Summary of Contents for Gigaset A580






































































































































































































Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands

Siemens Gigaset A580, User Manual

Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands