Siemens Gigaset A580 User Manual Download

Page: 150 / 197

149

Protecting our environment

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 28.04.2009

ion 8,

.09

.200

Protecting our environment

Our environmental mission statement

We, Gigaset Communications GmbH, bear social responsibility and are actively

committed to a better world. Our ideas, technologies and actions serve people,

society and the environment. The aim of our global activity is to secure sustain-

able life resources for humanity. We are committed to a responsibility for our

products that comprises their entire life cycle. The environmental impact of

products, including their manufacture, procurement, distribution, utilization,

service and disposal, are already evaluated during product and process design.
Further information on environmentally friendly products and processes is

available on the Internet at www.gigaset.com.

Environmental management system

Gigaset Communications GmbH is certified pursuant to the

international standards EN 14001 and ISO 9001.

ISO 14001 (Environment):

certified since September 2007 by

TüV SÜD Management Service GmbH.

ISO 9001 (Quality):

certified since 17/02/1994 by TüV Süd

Management Service GmbH.

Ecological energy consumption

The use of ECO DECT (

Page 69

) saves energy and is an active contribution

towards protecting the environment.

Disposal

Batteries should not be disposed of in general household waste. Observe the

local waste disposal regulations, details of which can be obtained from your

local authority or the dealer you purchased the product from.
All electrical and electronic equipment must be disposed of separately from

general household waste using the sites designated by local authorities.

If a product displays this symbol of a crossed-out trash can, the

product is subject to European Directive 2002/96/EC.
Appropriate disposal and separate collection of used equip-

ment help to prevent potential harm to both the environment

and health. They are a prerequisite for the re-use and recycling

of used electrical and electronic equipment.

For further information on disposing of your used equipment, please contact

your local authority or refuse collection service or the dealer you purchased the

product from.

Summary of Contents for Gigaset A580






































































































































































































Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands

Siemens Gigaset A580, User Manual

Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands