Siemens Gigaset A580 User Manual Download

Page: 55 / 197

Network services

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / netservices_SAG.fm / 28.04.2009

ion 8,

.09

.200

If necessary, enter the number to which the call is to be forwarded.

You can specify a fixed line network, VoIP or mobile number for for-

warding calls from a VoIP number.

You must specify another Gigaset.net number for call forwarding

from your Gigaset.net number.

§OK§

Press the Display key.

Press

and

hold

(idle status).

Call forwarding is activated for the selected phone number (receive number).

This does not result in calls for the other VoIP numbers or your fixed network

numbers being forwarded.

Deactivating call forwarding

Select the VoIP phone number for which you want to deactivate call

forwarding and press

§OK§

All Calls / No Answer / When Busy

Select and press

§OK§

(

‰

= on).

Off

Select and press

§OK§

Press

and

hold

(idle status).

Call forwarding is deactivated.

Activating/deactivating call waiting

Prerequisite:

Your phone will permit two parallel VoIP connections (see

Allow

1 VoIP call only

Page 116

If call waiting is activated, a caller on one of your VoIP connections will hear the

ringer if you are already on a call using this VoIP connection. This call is

announced sound and visually on your handset screen.
Calls on the fixed line connection are not signaled as call waiting. They are sig-

naled on other registered handsets to which the fixed line number has been

assigned as a receive number. If no other handset is available, the caller will

hear the busy tone.
Accepting/rejecting a waiting call,

Page 56

§Menu§

Select Services

VoIP

For All Calls

Call Waiting

Off

Select and press

§OK§

Press and

hold

(idle status).

Please note

Forwarding VoIP phone numbers can incur additional costs. Please consult

your VoIP provider.

Please note

The setting applies to all VoIP phone numbers. It does not affect the procedure

for call waiting on the fixed line network.

Summary of Contents for Gigaset A580






































































































































































































Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands

Siemens Gigaset A580, User Manual

Search results

Summary of Contents for Gigaset A580

Reviews:

Related manuals for Gigaset A580

Brands by name

Popular brands