Siemens Gigaset A580, User Manual

Page: 59 / 197

58
Using lists
Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / directories_charges.fm / 28.04.2009
Ve
rs
ion 8,
03
.09
.200
8
Opening lists with the Message key
You can use the Message key
f
to open the following list selection:
u Calls list
u Network mailbox,
£
Page 67
A separate list is displayed for each network mailbox.
Prerequisite: Its number is saved in the base station, it is switched on
(
£
Page 125 ) and the corresponding VoIP/fixed line network number is
assigned to the handset as a receive number.
An advisory tone sounds as soon as a new message arrives in a list. The
f
key flashes (it goes off when the key is pressed). The message You have new mes-
sages appears in the display in idle status .
List selection
The lists displayed after pressing the message key
f
depend on whether
there are any new messages.
f
key does not flash (no new messages): All lists are displayed. Select a list
with
q
. To open, press
§OK§
.
f
key flashes (new messages received): All the lists that contain new
messages are displayed as well as the network mailbox lists, whose connection
is assigned to the handset as a receive number (
Net AM Fixed Line
,
Net AM
IP1
,...).
Network Mailbox lists
If you select a Network Mailbox list and press
§OK§
you will be connected directly
to the network mailbox. For information on network mailboxes,
£
Page 67 .
Calls list
The Calls list contains the last 20 numbers, depending on the type of list set
u All calls
– answered calls
– unanswered calls
u Missed calls
– unanswered calls
Multiple calls from the same number will be stored once in the list of missed
calls (the latest call). The number of calls from this number is shown in brackets
after the entry.
Multiple calls from the same number are stored several times in the list of
answered calls.