GUI
Menu bar
3
22 | 64
Building Technologies
A6V10425605_b_en_--
Fire System
2016-12-12
Main menu
Submenu
Action
Diagnostic
Check
or <CTR+2> and <1>
The device test is triggered.
Check + alarm
1
or <CTR+2> and <2>
The device and alarm tests are triggered.
Check + test alarm
or <CTR+2> and <3>
The device and test alarm tests are triggered.
Alarm
1
or <CTR+2> and <4>
The device alarm is triggered.
Test alarm
or <CTR+2> and <5>
The device test alarm is triggered.
Read status
or <CTR+2> and <8>
The status of the device is read.
Simulate fault
1
or <CTR+2> and <9>
A device fault is simulated.
Warning DL2
1
or <CTR+2> and <0>
Danger level 2 is activated. See also 'Setting the danger level
38]'.
Set DL1
Danger level 1 is set.
Device information
or <CTR+3> and <1>
The current information of the selected device is displayed.
Parameter
or <CTR+3> and <2>
The current parameters of the selected device are displayed.
Position
1
or <CTR+3> and <9>
Set the danger level for inputs.
Device
Discover devices ...
Searches for devices in range and displays their identification
data.
Discover devices of same
network ...
Recognizes devices in the same network.
Get all data
Displays the connection status to the neighboring devices.
Displays the current connection data for the neighboring
devices.
Displays the battery charge state in 5 levels.
The total running time is read.
Get connectivity state
Displays the connection status to the neighboring devices.
Get neighbourhood table
Displays the current connection data for the neighboring
devices.
Get battery level
Displays the battery charge state in 5 levels.
Get total running time
The total running time is read.
Remove from radio cell
The device is removed from the radio cell.
Update
Periphery Update Wizard
Starts a wizard for the connected peripheral devices detection
and update
Exchange Gateway
Replace a radio gateway
