39
FLUDEX 4612 en
Operating instructions 10/2017
9.
Faults, causes and remedy
Observe the information in section 3, "Safety instructions"!
9.1
General
The following irregularities can serve as a guide for fault tracing.
Where the system is a complex one, all component units must be included when tracing faults.
The coupling must run with little noise and vibration in all operating phases. Irregular behaviour must be
treated as a fault requiring immediate remedy.
WARNING
Risk of serious injury through flying fragments
Risk of serious injury through flying fragments and/or risk of damage to the coupling.
– Any changes on the part of the user are not permitted. This applies equally to safety features designed
to prevent accidental contact.
– The coupling is designed only for the application specified in the order. Other operating conditions are
regarded as incorrect and must be contractually agreed. For any damage resulting therefrom only the
user or operator of the machine or plant is responsible.
WARNING
Risk of serious injury through flying fragments
Risk of serious injury through flying fragments and/or risk of damage to the coupling.
If any malfunctions or changes are noticed during operation, the drive assembly must be switched off
at once.
Note
Determine the cause of the fault, using the troubleshooting table. If the cause cannot be identified and/or
the unit repaired with the facilities available, you are advised to contact one of our customerservice
offices for specialist assistance.
WARNING
Serious injury
Risk of serious injury or risk of damage to the coupling.
The relevant safety and environmental regulations must be complied with.
Note
Depending on national regulations, coupling components have to be disposed of separately or
separated for recycling.
Summary of Contents for FLENDER FLUDEX FNA
Page 2: ......
