19
FLUDEX 4612 en
Operating instructions 10/2017
6.
Fitting
Observe the information in section 3, "Safety instructions"!
DANGER
Risk of explosion
Danger to life through ignition of any potentially explosive atmosphere while carrying out fitting work on
the coupling.
Whilst fitting the coupling there must not be an explosible environment.
NOTICE
Damage to the coupling, damage to other components
Damage to the coupling, the bearings and the shaft through incorrect pulling on.
The coupling parts must be fitted with the aid of suitable equipment to avoid damaging the shaft bearings
through axial joining forces. Use suitable lifting gear.
WARNING
Risk of serious injury through flying fragments
Risk of serious injury through flying fragments and/or unauthorized welding work on the coupling or on
coupling parts.
No welding work must be done on the coupling or coupling components.
The FLUDEX coupling is delivered preferably with finishbored and grooved hubs.
At the customer's request Flender also delivers unbored or prebored coupling parts.
The necessary refinishing must be carried out in strict compliance with the following specifications and with
particular care!
NOTICE
Damage to the coupling, damage to other components
Risk of damage to the coupling through incorrect rework.
Rework must be done considering the specifications and with particular care. Responsibility for carrying
out the refinishing is borne by the customer. Flender will accept no guarantee claims arising from
unsatisfactory reworking.
Note
Couplings with CE marking for use in potentially explosive areas are delivered exclusively with
finishbored hubs.
Summary of Contents for FLENDER FLUDEX FNA
Page 2: ......
