5.3 Mounting radio fire detector FDOOT271-O
The action of inserting the radio fire detector into the detector base activates it;
the detector then logs on to other radio devices immediately. Therefore, start from
the radio gateway and work outwards to install the individual radio fire detectors.
1
2
4
5
3
Figure 7: Mounting the radio fire detector
1 Battery pack BAT3.6-10
1
4 Battery cable
2 Inserting the battery pack
5 Battery connector
3 Holder
1
Not included in the scope of delivery
The flashing behavior of the internal alarm indicator is described in the
'Internal alarm indicator [➙ 19]' chapter.
w
The radio gateway has been activated and switched to maintenance mode.
w
The radio fire detector is set to the factory settings. [➙ 40]
w
You have the battery pack and the required accessories to hand.
w
The detector base FDB271 is mounted. [➙ 32]
1. Install the accessories you require.
2. Label the new battery pack (1) with the current date.
3. Connect the battery connector (5) of the new battery pack.
4. Insert the new battery pack (1), paying attention to the position of the battery
cable (arrows at 4).
Mounting / Installation
Mounting radio fire detector FDOOT271-O
5
A6V10425624_en--_h
33 | 50
Summary of Contents for FDOOT271-O
Page 49: ...A6V10425624_en _h 49 50 ...
