7.5 Establishing factory settings
All existing settings are deleted and reset to the factory settings.
new
1
2
Figure 10: Establishing factory settings
1 Internal alarm indicator
2 'new' opening with button
To create the factory settings on the radio fire detector, proceed as follows:
w
The radio fire detector is being supplied with power.
w
You have a slim pen or pencil to hand.
1. Remove the radio fire detector from the detector base.
2. Wait until the internal alarm indicator (1) flashes green (2-second interval).
a
The detector is 'out of base'.
3. Press the pen or pencil into the 'new' opening (2) for 5 seconds.
a
The internal alarm indicator flashes red (2-second interval).
a
The radio fire detector is set to the factory settings.
See also
2
Internal alarm indicator [➙ 19]
Maintenance / Repair
Establishing factory settings
7
40 | 50
A6V10425624_en--_h
Summary of Contents for FDOOT271-O
Page 49: ...A6V10425624_en _h 49 50 ...
