Siemens FC2005, Installation, Operation And Maintenance Manual

Page: 65 / 101

60
FC
2
0
0
5
Des
igo UL
FC
2
0
0
5
Des
igo ULC
FC
9
0
1
Cerbe
rus
UL
FC
9
0
1
Cerbe
rus
ULC
STRI-M x x
SZM x x
SLIM x x
SFPO-11 x x
SFPT-11 x x
SFP-11 x x
ILED-SC x x
ILED-SW x x
Other
PAD5 x x x x
Notes
：
1) Siemens SLC devices, detectors and modules, up to a maximum of 50 addresses may be used.
2) For specific wiring and installation information, read the instructions provided with each device.
3) If more than one HCP is used on an SLC device loop, the loop must be wired Class A or the riser
conductors must be installed in accordance with the Survivability From Attack By Fire
requirements in the National Fire Alarm Code, NFPA 72. If wired Class A, at least one HLIM loop
isolator must be installed between each HCP and between the panel and the first and last HCP.
See the HLIM installation instructions for the maximum number of isolators allowed per loop and
other wiring instructions.
4) FC2005 support FDOOTC441 CO functionality. CO channel can be configured as automatic alarm
event and supervisory event in the detection tree of the FC2005. But it does not comply with UL
2017 standard when the CO channel is configured for an automatic alarm event. It does comply
with UL 864.
5) H-series, 8700 series and S-series modules are the same devices with different sales channels.
Their corresponding relationship is shown in the below table:
H-series 8700-series S-series
HFP-11 8713 SFP-11
HFPT-11 8712 SFPT-11
HFPO-11 8710 SFPO-11
HMS-S 8700-S SMS-S
HMS-D 8700-D SMS-D
HMS-M 8700-M SMS-M
HMS-SA - SMS-SA
HMS-2S - SMS-2S
HTRI-S 8702 STRI-S
HTRI-R 8704 STRI-R
HTRI-D 8703 STRI-D
HTRI-M 8701 STRI-M
HCP 8706 -
HZM 8705 SZM
ILED-HC/HW 8726C/W ILED-SC/SW
firealarmresources.com