SIEMENS ADSL E-110_E-110-I user manual
2. Creating a IPoA interface.
1. Select
Wan
>
IPOA
.
2. On
the
IOoA Configuration
page click
[Add]
to add a new IPoA interface.
3. Enter the provided fields as below:
Field
Description
IPoA Interface
Select an IPoA interface from the available interfaces, e.g.
ipoa-0
.
Conf. IP Address
Enter the IP address given by your ISP, e.g.
10.100.17.89
.
Interface Sec Type
Select
Public
Netmask
Enter the IP address given by your ISP, e.g.
255.255.255.248
.
RFC 1577
For IPoA select
Yes
, for 1483 bridge select
No
Use DHCP
Select
Disable
Default Route
Select
Enable
Gateway IP Address
Enter the IP address given by your ISP, e.g.
10.100.17.94
.
4. After entering the fields above, click
[Apply]
.
5. When confirmation page appears, click
[Close]
.
6. You will return to the
IpoA Configuration
page and see the newly added IPoA entry.
Part 2: Check your connection status.
Select
Home
. On the
System View
page, the
WAN Interfaces
item should display the interface you
created to communicate with your ISP. A green ball in the
Status
field indicates a successful connection.
Part 3: Configuring the PC.
Keep your PC’s setting as a DHCP client. No further configuration is required.
78
Rev:01_040220
