Siemens E-110 User Manual Download Page 80

Page: 80 / 90

SIEMENS ADSL E-110_E-110-I user manual

5. Commit your changes.

Select

Admin

Commit & Reboot

and click

[Save]

to save your changes to permanent storage.

Part 2: Check your connection status.

Select

Home

. On the

System View

page, the

WAN Interfaces

item should display the interface you

created to communicate with your ISP. A green ball in the

Status

field indicates a successful connection.

Part 3: Configuring the PC.

Option 1: Your PC use the IP given by your ISP.

If this is the case, configure your PC to use the static IP given by your ISP, for example:

IP address

: 10.100.16.2

Subnet mask

: 255.255.255.0

Default gateway

: 10.100.16.254

Note:

With the configuration above, your PC should be able to access the Internet now but will lose the

local connection to the device’s LAN port. If you want to configure the ADSL Router via the Web

browser again, you should re-configure the PC to

192.168.1.x

to be in the same subnet of the

device’s LAN port.

Option 2: Your client use PPPoE software to connect to your ISP.

Just keep your PC’s setting as a DHCP client and execute the PPPoE software to make the connection.

PPP Connection Mode

In this deployment environment, the PPPoE/PPPoA session is between the ADSL WAN interface and BRAS.

The ADSL Router gets a public IP address from BRAS when connecting to DSLAM. The multiple client PCs

will get private IP address from the DHCP server enabled on private LAN. The enabled NAT mechanism will

translate the IP information for clients to access the Internet.

Part 1: Configuring the ADSL Router

1. Creating an ATM VCC interface.

1. Select

Wan

ATM VC

2. On

the

ATM VC Configuration

page click

[Add]

to add a new ATM VCC interface.

Rev:01_040220

Summary of Contents for E-110



























































































Search results

Summary of Contents for E-110

Reviews:

Related manuals for E-110

Brands by name

Popular brands

Siemens E-110, User Manual

Search results

Summary of Contents for E-110

Reviews:

Related manuals for E-110

Brands by name

Popular brands