Siemens CR-IR 347, Service Manual, Page: 21 / 123

CR-IR347 Service Manual PM - 15.2
009-058-03
08.30.2002 FM3476
PM - 15.2
■
Check for Output Characters
Make sure that the output characters are indicated correctly on the output film.
◆
CHECKS
◆
• Make sure that the output characters are indicated correctly.
If anything abnormal is found, refer to “4. [2] CONFIGURATION SETTING” in the
“Maintenance Utility” volume.
• Ensure that there is nothing abnormal with the output characters.
If anything abnormal is found, refer to the “Troubleshooting” volume.
FR7H6962.EPS
b c
a
d
In normal two-image output mode
Image
f
g
i
j l s
m
k n
o
p
r q
t h
u
Character
display area B
Character display area A
e
Image
❍
Character display area B
(below the image area)
e: Image processing conditions
f: Exposure menu name
g: Standardization conditions
and amendments
h: Engineer code and exposure
table information
i: Department name
j: Patient ID
k: Patient name (kana)
l: Patient name (kanji)
m: Exposure date and time
n: Film mark
o: Sex
p: Age or birth date
q: Image reduction ratio
r: Set processing information
s: Left-right reversal mark ( )
t: Data compression code
u: PEM information or
Ene.-Sub./superposition information
❍
Character display area A
(above the image area)
a: Hospital name
(institution name)
b: IP number
c: EDR mode and menu code
d: System ID and image number
R