Siemens CR-IR 347, Service Manual, Page: 19 / 123

CR-IR347 Service Manual PM - 15
009-058-03
08.30.2002 FM3476
PM - 15
(2) Using the test menu, record and output an image.
❍
ST
“ ” (for Japanese version)/“IMAGE FORMAT” (for versions other than
Japanese)
❍
HR
“ ” (for Japanese version)/“BREAST, L (DSR)” or “BREAST, R (DSR)”
(for U.S. version)/“IMAGE FORMAT2” (for European version)
(3) Make sure that there is no jitter in the image of the border and steel rules on the output
film.
◆
CHECK
◆
Check for jitter.
If any jitter is found, refer to “10. Troubleshooting Procedures Based on Abnormal Image”
in the “Troubleshooting” volume.
(4) Compare the images of the washer for ST and HR to ensure that the image for HR is
smoother.
◆
CHECK
◆
Using a loupe, make sure that the image of the washer’s curvature for HR appears
smoother than that for ST.
FR7H6965.EPS
ST HR