102
Clinitek Advantus
Operator’s
Guide
S
y
s
t
e
m
C
o
n
f
i
g
u
r
a
t
i
o
n
Edit Flagged Results
Use the
Edit flagged results
cycle key to set editing of results that are flagged
as positive and selected for confirmatory reports. You can select this option
only if Mark positives is On, and confirmatory flags are set.
Enter Sample IDs
You can enter specimen identification numbers either as part of a manually
entered load list or immediately prior to testing the specimen.
Use the
Enter sample IDs
cycle key to set entry of specimen identification
numbers.
Tech ID
Identify the technician performing the tests. The Tech ID displays on the
Ready/Run screen, and on QC results only, or on both patient and QC results.
Use the
Tech ID
cycle key to set display of the Tech ID.
To...
Select...
disable editing,
Off
allow editing of confirmatory reports,
On
To...
Select...
disable entry of specimen identification
numbers,
Off
force entry of specimen identification
numbers,
On
To...
Select...
disable display of the Tech ID,
Off
display the Tech ID on QC results,
On, control results only
display the Tech ID on QC and patient
results,
On, both patient and control
results