Chapter 5:Connection Mode
Local Network – UPnP
The UPnP is available only for Windows XP. If you are not user of Windows XP, this page does not
have any meaning to you.
This page allows you to enable the UPnP
function through the web page for your
router.
Internet-Connections Setting
To set WAN settings for each service, please open
Advanced– Internet Setting
. This page allows
you to add new WAN settings, to edit or remove created WAN settings.
If you click the
Connect
line under the PVC
Name item, the system will connect to WAN
automatically. If the WAN connection is OK,
you can check the detailed information
directly.
Adding a New One
You have to type in the VPI and VCI values in the entry boxes. Then click
Next
. The screen will get
into the
Connection Type
page of
Quick Setup
and ask you to fill in the data according to the
request of the screen. Refer to
Quick Setup
for more information if you don’t know how to set the
configuration.
To add a new WAN connection, please click the
Add
button. The following screen appears.
VPI (Virtual Path Identifier)
:
Identifies the virtual path between endpoints
in an ATM network. The valid range is from
0 to 255. You cannot type in the number
randomly if you desire. Please refer to the
value that your ISP gave.
VCI (Virtual Channel Identifier)
:
Identifies the virtual channel endpoints in an
ATM network. The valid range is from 32 to
65535 (1 to 31 is reserved for well-known
protocols). You cannot type in the number
randomly if you desire. Please refer to the
value that your ISP gave.
Service Category
:
It decides the size and rate for the packets of
the data in different service type. There are
five categories provided here for your
selection. Please choose any one of it as you
desired.
