Siemens CERBERUS PYROTRONICS ADB-3, Installation Instructions Manual

Page: 11 / 12

11
DETECTOR INSTALLATION INSTRUCTIONS
ADBI-60 Base [for MXL/MXL-IQ and IXL (ICON-1)]
FP-11 w/DB-ADPT P/N 315-095921-3
FPT-11w/DB-ADPT P/N 315-095921-3
ID-60I P/N 315-090287-2
ID-60IA P/N 315-090287-2
ID-60IAH P/N 315-090287-2
ID-60IH P/N 315-090287-2
ID-60T P/N 315-090288-2
ILP-1 P/N 315-092594-3
ILP-2 P/N 315-095028-3
ILPT-1 P/N 315-092594-3
ILT-1 P/N 315-093336-1
ADBI-60 Base (for XL3)
DI-X3 P/N 315-083534D
DI-X3H P/N 315-086587B
DI-AX3 P/N 315-085388F
DI-AX3H P/N 315-086588B
DT-X3 P/N 315-084125C
ILP-1 P/N 315-092594-3
ILPT-1 P/N 315-092594-3
ADB-3 Base
DI-3 P/N 315-081943-15
DI-3H P/N 315-081943-15
DI-A3 P/N 315-081943-15
DI-A3H P/N 315-081943-15
DT-3P P/N 315-084401-5
PE-3 P/N 315-090875-6
PE-3T P/N 315-090875-6
in the InstallationlWiring Diagrams above and wired to the specific system
modules and control panels following the appropriate instructions. For opera-
tion with System XL3 and System MXL/MXL-IQ, note any limitations on the
number of audible bases permitted on each AA-30U, AE-30U, SPX-1, MMB-1/
2, SMB-1/2, or CSM-4 audible circuit, depending on the total cable resistance
for each audible signal circuit. (See ELECTRICAL RATINGS section.)
TABLE 1
Note: The Audible Base Models ADBI-60 and ADB-3 attach only to a
4-inch square, deep, electrical box.
DETECTOR MOUNTING
(USING THE ADBI-60 AND ADB-3 BASES)
The detector base comes from the factory prewired. All signaling and initiating
circuits are connected directly to the back of the ADBI-60 or ADB-3 audible
base using the four-position terminal blocks.