Siemens BTC-BR, User Manual, Page: 15 / 22

BTC-BR User’s Manual
15
2.4.9 – Programming
This item is divided into 05 (five) sub-items: Installation, Date-Time, Manufacturing Data,
Erase Memory and Software Version . For each sub-items there are others sub-items that will allow
programming of specific functions of MTCO.
2.4.9.1 – Installation
Steps Contents of the display Keys Procedures
1
2
3
4
5
6
7
8
1. INSTALLATION
←
2. DATE - TIME
3. MANUFACT DATA
(
6
) – Scroll ( E ) Enter
E
1. READ PARAMETERS
←
2. WRITE PARAMETERS
3. PROGRAMMING K
(
5
/
6
) – Scroll ( E ) Enter
E
READ PARAMETERS
READ OK!
( C ) Exit
Select Installation
This function will access a sub-menu in which
will be possible to read and record all the
programmable parameters of MTCO, and to
program one by one, if necessary.
Select Read Parameters
In this function will be possible to read the
parameters necessary for programming a new
MTCO identical to the defective.
After completion of reading, the data
remain stored in the memory of the
programmer and can be recorded in other
unprogrammed MTCO.
1. READ PARAMETERS
2. WRITE PARAMETERS
←
3. PROGRAMMING K
(
5
/
6
) – Scroll ( E ) Enter
Select Write Parameters
This function is a complement of the
previous. In this case the parameters are
recorded in the MTCO to be installed.
WRITE PARAMETERS
WRITE OK!
( C ) Exit
After completion of writing, the new MTCO is
able to be installed on the vehicle from which
the defective equipment was removed.
1. READ PARAMETERS
2. WRITE PARAMETERS
3. PROGRAMMING K
←
(
5
/
6
) – Scroll ( E ) Enter
This function allows changing the constant of
correction “K” of the tachograph MTCO. This is
one of the parameters that the function “Read or
Save Parameters” keep in memory. This
adjustment is necessary for the MTCO
understand the sign of speed from the sensor as
being the real.
* * *
W ADJUST
* * *
[25054] P/Km
( E ) – Ajustar ( C ) Sair
C
E
C
E
In case of wanting to correct the constant “K”,
press
L to clear the fields of editing, enter the
desired value and press E . This adjustment is
similar to the installing a reducer in the
mechanical tachograph or adjustment of the keys
in the electronic tachograph.
4. CHECK K MEASUR
5. DEVICE TESTING
6. PROGRAMMING
←
(
5
/
6
) – Scroll ( E ) Enter
Select Programming
This function will access a sub-menu in which
will be possible to make all necessary
adjustments to the operation of MTCO.