BTC-BR User’s Manual
12
2.4.8.2 – Test Chart (Proof of operation)
Steps
Contents of the display Keys
Procedures
1
2
3
4
5
6
7
4. CHECK K MEASUR
5. DEVICE TESTING
←
6. PROGRAMMING
(
5
/
6
) – Scroll
(
E
) Enter
E
1. TESTE DE DIST.
2. TEST CHART
←
3. VARIABLE SPEED
(
5
/
6
) – Scroll
(
E
) Enter
E
TEST CHART
MTCO
←
KTCO
(
5
/
6
) - Scroll
(
E
) Enter
Select Device Testing
This function will access a sub-menu in which
will be possible to measure the indication of
the odometer, to generate a test chart and
inject a signal of speed previously known.
Select Test Chart
In this function will be possible to generate
a disk of proof of good operation of
tachograph or if there is an anomaly in the
recording.
Select MTCO or KTCO
This function prepares the Calibrator to
generate a signal of speed compatible
with the selected tachograph.
TEST CHART
K = [08000] P/Km
(
E
) – Start
(
C
) Exit
Enter the value of constant “K” readed in
the previous step. (Check “
K” Measuring
).
TEST CHART
MEAS RANGE =[125] Km/h
(
5
/
6
) - Scroll
(
E
) Cont.
Enter the value corresponding to the larger
scale of the speed in the display of
speedometer/tachograph. The most usual is
125 km/h. See Table 01.
C
TEST CHART
S= 000 t= 075 P= 01
MR=125km/h K=08000
(
C
) – Exit
The automatic test starts in the step
01
. They are
22
steps with duration and speed variables (see
Table 01). The total time of the test is
1h50’
, and
may be interrupted at any time.
TEST CHART
S= 000 t= 001 P= 22
∗
∗
∗
END OF TEST
∗
∗
∗
(
C
) – Exit
At the end of the test will be issued
information on the screen of the
programmer and the red led will be lit until
pressed the
C
button.
E
E
E