BTC-BR User’s Manual
14
2.4.8.3 – Variable Speed Test
Steps
Contents of the display Keys
Procedures
1
2
3
4
5
6
7
4. CHECK K MEASUR
5. DEVICE TESTING
←
6. PROGRAMMING
(
5
/
6
) – Scroll
(
E
) Enter
E
1. DIST COUNT TEST
2. TEST CHART
3. VARIABLE SPEED
←
(
5
) – Scroll
(
E
) Enter
E
VARIABLE SPEED
MTCO
←
KTCO
(
5
/
6
) - Scroll
(
E
) Enter
Select Device Testing
This function will access a sub-menu in which
will be possible to measure the indication of
the odometer, to generate a test chart and
inject a signal of speed previously known.
Select Variable Speed
In this function will be possible to generate a
signal of speed and change it gradually from
more to less, observing the behavior of the
indicator (speedometer).
Select MTCO or KTCO
This function prepares the Calibrator to
generate a signal of speed compatible
with the selected tachograph.
VARIABLE SPEED
K = [08000] P/Km
(
E
) – Speed Adjust
Enter the value of the constant “K” readed
in the step
2.4.5
(Check “
K” Measuring
).
VARIABLE SPEED
K = [08000] P/Km
S = [100] Km/h
(
E
) – Start
(
C
) Exit
Enter the value of speed that you want the
tachograph indicate, observing the value of the
scale range. Press
E
to the test operates.
C
VARIABLE SPEED
K = [08000] P/Km
S = [100] Km/h
(
E
) – Speed Adj
(
C
) Exit
By activated the test, the value of speed can not
be edited more, only by pressing
E
again. By
pressing the button
E
it will be possible to adjust
the value of speed. In this moment is released
the editing mode to the desired value.
VARIABLE SPEED
K = [08000] P/Km
S = [060] Km/h
(
E
) – Start
(
C
) Exit
E
E
E
E