Setup
menu
HD Power Down
In this input field you can set the time after which the motor of the IDE hard
disk drive powers down if no access operations are performed.
Possible entries:
DISABLED
The function is disabled.
5 MIN
The hard disk drive motor powers down if no access operations are
performed for five minutes.
10 MIN
The hard disk drive motor powers down if no access operations are
performed for ten minutes.
15 MIN
The hard disk drive motor powers down if no access operations are
performed for fifteen minutes.
Default entry:
DISABLED
Hard Disk CTRLR
This field allows you to disable the hard disk controller on the system board.
Possible entries:
ENABLED
The IDE hard disk controller on the system board is on.
DISABLED
The IDE hard disk controller on the system board is off.
Default entry:
ENABLED
A26361-D802-Z121-3-7619
15
Setup menu
Soft Power off
This input field is effective if the system board supports PC power off by
means of the SWOFF program.
In this field you can specify if it is possible to power off the PC with the
SWOFF program.
Possible entries:
DISABLED
The system unit can be powered off only with the ON/OFF switch.
ENABLED
The system unit can be powered off either with the SWOFF program or
with the ON/OFF switch.
Default entry:
DISABLED
Entries on the third screen page of the SETUP menu
Time
Date
The third screen page of the SETUP menu displays also the time and the
date of your PC.
System BIOS
In this input field you can make available a ROM address area of 64 Kbytes
for requests via the ISA bus (e. g. SCSI-BIOS).
Possible entries:
64K
The address area E0000H - EFFFFH (64 Kbytes) is available for requests
via the ISA bus.
The address area F0000H - FFFFFH (64 Kbytes) is reserved for the
system BIOS.
128K
The address area E0000H - FFFFFH (128 Kbytes) is reserved for the
system BIOS.
Default entry:
64K
16
A26361-D802-Z121-3-7619
