Siemens Healthcare DCA Vantage, Operator'S Manual, Page: 54 / 164

DCA Vantage Operator’s Guide 53
Op
era
ting t
h
e Syst
em
The following table explains the different tests you can perform, and if they
require additional action:
User System Test Results
The User System Test Results screen displays the status of each system test
you selected at the User System Test menu screen. The results display after
the tests that require user action are complete and while the automatic tests
are running on the system.
NOTE:
You can cancel the tests while they are running.
If you select.. then...
Touchscreen Select each numbered key. The key changes from a
number to a check mark. If a section fails, the number
remains.
NOTE:
The test times out if all the buttons are not
selected within 60 seconds.
Sound
1. Listen for an alert sound.
2. If you hear an alert sound, select
Yes
.
3. If you do not hear an alert sound, select
No
.
Door Open and close the door to verify that the screen
reflects the status of either the open or closed state.
Onboard Barcode
Reader
Scan a DCA barcode with the onboard barcode
reader to verify that the onboard barcode reader
works properly.
External Barcode
Reader
Scan a DCA barcode with the external barcode reader
to verify that the external barcode reader works
properly.
Onboard Printer Verify that the onboard printer prints a report.
External Printer Verify that the external printer prints a report.
Serial Port The system automatically runs the test.
Ethernet Port The system automatically runs the test.
USB Port The system automatically runs the test.
Lamp The system automatically runs the test.
Motor Sequence The system automatically runs the test.
Measurement
System
The system automatically runs the test.