manualshive.com logo in svg

Siemens Healthcare Clinitek Status Connect System, Operator'S Manual

Share
Download
Siemens Healthcare Clinitek Status Connect System Operator'S Manual Download Page 57

Clinitek Status Connect System  

57 

Operator’s Guide 

 

Pre-service Checklist 

Record the following information and keep this sheet in your laboratory for 
future reference. 

Date of Installation: 

 

Serial Number: 

 

NOTE: 

After recording the information, make photocopies of this page to use 

before calling your local technical support provider. 

1. 

What is the version number of the software? To find 
this information: 
1.  Turn system power off. 
2.  Wait approximately 15 seconds. 
3.  Turn system power on. 
The software version displays after the initialization 
screen. 

 

2. 

Are any error messages or warnings displayed?  If so, 
what are they? List the error description and any 
numbers that display. 

 

3. 

Have you performed the appropriate steps suggested 
on the display for the error being displayed? 

 

4. 

Is the printer and/or host computer/LIS connected and 
turned On? 

 

5. 

Is the bar code scanner working properly? 

 

 
For cleaning and disinfecting information, refer to the Clinitek  
Operator’s Manual. 

Summary of Contents for Clinitek Status Connect System

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands