Siemens Healthcare Clinitek Status Connect System, Operator'S Manual

Page: 32 / 80

Clinitek Status Connect System 32 Operator’s Guide
14. Use the arrow keys to indicate the strip expiration date.
15. Select
Enter .
The Prepare Test screen displays.
Refer to the Clinitek Status Operator’s Manual as needed.
16. Select Start .
The Results screen displays.
NOTE:
When the instrument is set to determine pass/fail, if the test results
pass, the Results-QC Test: Pass screen displays.
If the test results fail, the Results-QC Test: Fail screen displays.
17. To print the results, select Print .
18. To view the next page, select More .
And to return to the previous page, select Back .
19. Select Done .
The QC Test-Select PASS or FAIL screen displays.
20. To pass the test, select QC PASS .
To fail the test, select QC FAIL .
21. Select Done .
The QC Test-Results Summary screen displays.
NOTE:
Depending on instrument configuration, patient tests cannot be run
until the QC tests pass.
22. To repeat a failed QC test, select
Repeat failed QC test .
23. Select Done to return to the Select Ready screen.
Running a QC Cassette Test
NOTE: Prepare the controls according to the manufacturer’s instructions.
This section describes how to run a QC cassette test when it is due and for
one QC level. Repeat the procedure if more than one QC level is set.
To perform a QC cassette test when due, perform the following steps:
1. At the
Select Ready screen, select QC Test Cassette test due .
The QC Test screen displays.
2. Select QC Cassette Test Required .
3. If the instrument is set to determine pass/fail, the Control Lot screen
displays. Go to Step 8.
If the operator is set to determine pass/fail, the Enter Control Name screen
displays.
4. Enter the name of this control.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .
5. Select Enter .
The Enter Control Level screen displays.
6. Enter the control level.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .