Siemens Healthcare Clinitek Status Connect System, Operator'S Manual

Page: 27 / 80

Clinitek Status Connect System 27 Operator’s Guide
5. To permit patient tests if the QC test fails, select Yes .
To prevent patient tests if the QC test fails, select No .
6. Select Next .
The QC Settings-Strip test screen 3 of 3 displays.
NOTE:
If you selected to have the operator determine pass or fail in Step 4
above, the Defining QC Strip Test Controls and Setting QC Strip Test
Pass/Fail Ranges below, are not necessary.
NOTE:
If you selected to have the operator determine pass or fail in Step 4
above, you must use the strip selected in the Urinalysis Test Settings screen,
a color-banded strip, or an IR-banded strip. You can only run one QC level for
each QC test; additional levels require an additional QC test.
Defining QC Strip Test Controls
To define QC strip test controls, perform the following steps:
1. To set the number of levels to complete a QC test, select
1 , 2 , or 3 .
2. For each control set in Step 1, select the corresponding Control Level, 1 ,
2 , or 3 .
For example, if you set 2 controls, you must define Control Level 1 and
Control Level 2.
The Control Level 1-Strip test screen displays.
3. Select Enter name of control .
The Name of Control screen displays.
4. Enter the name of this control.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .
5. Select Enter .
The Control Level 1-Strip test screen displays.
6. Select Enter name of level .
The Name of Level screen displays.
7. Enter the name of this level.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .
8. Select Enter .
The Control Level 1-Strip test screen displays.
9. Select Select strip type .
The QC Strip Type-Select strip for this QC level screen displays.
10. Use the arrow keys to select the strip type.
11. Select
Select .
The Control Level 1-Strip test screen displays.