Siemens Healthcare Clinitek Status Connect System, Operator'S Manual

Page: 39 / 80

Clinitek Status Connect System 39 Operator’s Guide
5 Data Management
This section describes data storage and management on the instrument.
Clinitek analyzers may contain up to 950 patient test and 200 QC test
results and up to 700 authorized operators.
Clinitek Status analyzers may contain up to 200 patient test and 50 QC test
results and 20 authorized operators.
NOTE: If the LIS sends the Operators List to the system, Operator Names are
not retained if the system loses power. The LIS must resend the list.
Managing Patient and System Information
This section describes how to recall or delete patient or QC records. You can
recall all patient data or QC tests or search records by ID or date. You can
also delete all patient and QC records stored on the instrument.
Recalling Patient or QC Data
To recall patient or QC records, perform the following steps:
1. At the
Select Ready screen, select Recall Results .
The Recall Options screen displays.
2. Use the arrow keys to select Recall Patient Tests or QC Tests .
3. Select Select .
The Recall Results screen displays.
4. To search patient tests, select Patient tests .
To search QC tests, select QC tests .
5. Select Next .
The Recall Results screen displays.
6. There are 3 ways to search:
•
To search by patient name or ID, select Search by name or ID . Go
to Step 7.
•
To search by date, select Search by date . Go to Step 9.
•
To retrieve all the data, select View all results . Go to Step 11.
7. Enter patient name or ID.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .
8. Select Enter . Go to Step 11.
9. Use the arrow keys to indicate the date range.
10. Select
Search .
The Recall Results-Search Results screen displays.