manualshive.com logo in svg

Siemens Healthcare Clinitek Status Connect System, Operator'S Manual

Share
Download
Siemens Healthcare Clinitek Status Connect System Operator'S Manual Download Page 15

Clinitek Status Connect System  

15 

Operator’s Guide 

 

2 Operating the Connector 

This section describes using the Clinitek Status connector with the 
Clinitek Status analyzer. For complete information on using the analyzer, refer 
to the 

Clinitek Status Analyzer Operator’s Manual

. 

Overview 

The connector allows the system to connect to a Local Area Network (LAN) 
and supports several external devices. The connector includes two USB 
ports, three serial RS-232 ports, and one Ethernet RJ45 port. 

The USB ports allow for software upgrades, copying configuration setup, 
wireless network connectivity, and external keyboard use. The RS-232 ports 
are used to send data to Laboratory Information Systems (LIS) and support 
an optional bar code scanner. The RJ45 port provides network connectivity for 
communication with remote systems. 

Getting Started 

This section explains how to set up the Clinitek Status Connect system for the 
first time using the Start-Up Wizard. For unpacking and installation 
instructions, see 

System Configuration

. 

Using the Start-Up Wizard 

After you connect the instrument and connector, and turn the system on, the 
instrument completes self-checking and the Start-Up Wizard screen displays. 
Use the Start-Up Wizard to set basic functionality including language, current 
date and time, and units convention. 

To set basic functionality, perform the following steps: 
1. At the 

Select Language

 screen, use the arrow keys to select your 

language. 

2. Select 

Select

. 

The next 

Start-Up Wizard

 screen displays. 

3. Select

 

Next

. 

The 

Set Date & Time

 screen displays. 

4.  Use the arrow keys to set the month, day, year, and time.  
5. Select 

Next

. 

The 

Input Settings

 screen displays. 

6.  Select the button for 

Quick Test

 or 

Full Test

.  

Refer to the 

Clinitek Status Analyzer Operator’s Manual

 for descriptions of 

Quick and Full tests.  

Summary of Contents for Clinitek Status Connect System

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands