EXC-GT – FM super-compact transmitter series
User’s manual – Page 33 of 98
The above example shows the standard level of the RDS signal (2 KHz), as well as the bar indicator, which shows the level
graphically.
Adjustments can be made to modulation of the auxiliary signal via the
SETUP
menu (
2
10.3).
10.2.d
MPX GRAPH sub-menu
This sub-menu graphically shows the modulation trend over time in three different scales indicated on the right. The different scales
can be selected by simply turning the knob.
The first (
LAST 2 Min.
) shows the modulation trend for the last two minutes:
The second (
LAST 2 Hr.
) shows the modulation trend for the last two hours:
The third (
LAST 24 Hr.
) shows the modulation trend for the last 24 hours:
Consequently, the graph shown on the third example screen approximately shows the modulation trend for the last two hours.
The screens are shown cyclically. As such, at the third screen, turning the knob clockwise will take you back to the first screen.
Similarly, if you are at the first screen and you turn the knob anti-clockwise, the last screen will be selected.
10.2.e
SYSTEM sub-menu
The screen for this sub-menu shows the key parameters (set frequency, mono/stereo mode, etc.) as follows:
