EXC-GT – FM super-compact transmitter series
User’s manual – Page 26 of 98
36) Ensure that the
EDIT
option is selected; otherwise, turn the knob to select it, then press to confirm.
37) A value will be indicated after
Mode
. This indicator is normally followed by the operating mode (mono, stereo, mono L+R, or
Mpx).
38) Turn the knob until the desired setting is selected, based on your needs, then press the knob to confirm.
39) A value will be indicated after
Preemphasis
. Turn the knob until the preemphasis value for your geographical region is
selected (50 microseconds in Italy), then press the knob to confirm the value.
40)
OK
will be highlighted. Three choices are now available:
o
If the parameters set are correct – skip directly to step 41) to confirm the settings.
o
If the parameters set are all incorrect – cancel all settings by turning the knob until
ABORT
is highlighted, then skip to step 41).
o
If a slight adjustment to the parameters is required – turn the knob until
EDIT
is highlighted, then return to step 37).
41) Press the knob to confirm. You will return to the page indicated in step 3).
8.1.g
System date and time
Setting the date and time is important because it allows the transmitter to keep track of events (alarms, etc.) that occur while the
transmitter is operating. Set the date and time as follows:
42) Turn the knob until the
NEXT PAGE
sub-menu is selected, then press the knob to confirm. The display will indicate the
second page of the
SETUP
menu (
2
section 10.3):
43) Turn the knob until the
DATE TIME
sub-menu is selected, then press the knob to confirm.
44) The date and time settings screen will appear:
45) Ensure that the
EDIT
option is selected; otherwise, turn the knob to select it, then press to confirm.
46) The hour will be indicated after
Time
. Turn the knob and adjust the current hour, then press the knob to confirm.
47) The minute will be indicated. Turn the knob to adjust the current minute, then press to confirm.
48) The second will be indicated. Turn the knob to adjust the current second, then press to confirm.
49) The day of the month will be indicated after
Date
. Turn the knob to set the current day, then press to confirm.
50) The month will be indicated. Turn the knob to set the current month, then press to confirm.
51) The year will be indicated. Turn the knob to set the current year, then press to confirm.
52)
OK
will be highlighted. Three choices are now available:
o
If the parameters set are correct – skip directly to step 53) to confirm the settings.
o
If the parameters set are all incorrect – cancel all settings by turning the knob until
ABORT
is highlighted, then skip to step 53).
o
If a slight adjustment to the parameters is required – turn the knob until
EDIT
is highlighted, then return to step 46).
53) Press the knob to confirm. You will return to the
SETUP
menu screen indicated in step 42).
