EXC-GT – FM super-compact transmitter series
User’s manual – Page 44 of 98
The display will show the following parameters:
MAC
– physical Media Access Control address for the internal network card.
IP
– static IP address for the internal network card.
To set the IP address:
1)
Ensure that the
EDIT
option is selected; otherwise, turn the knob to select it, then press to confirm. The first number after
IP
will be highlighted.
2)
Turn the knob to change the first number of the IP address, then press to confirm. The second number will be highlighted.
3)
Turn the knob to change the second number of the IP address, then press to confirm. The third number will be highlighted.
4)
Turn the knob to change the third number of the IP address, then press to confirm. The fourth number will be highlighted.
5)
Turn the knob to change the fourth number of the IP address, then press to confirm.
6)
Using the knob, select
OK
to save the settings,
EDIT
to make further changes, or
ABORT
to exit without saving the new
settings, then press to confirm(for further details regarding these commands, see
2
9.4.a).
10.3.n POW TIMER setting
Used to automatically decrease the transmitter’s power by a given percentage during a specific time period (e.g., night time).
The display shows the following parameters:
OFF
or
ON
– power reduction deactivated (OFF) or activated (ON).
Reduce
: percentage of power reduction compared to the power set via the menu, as per section 10.3.b.
From
– followed by two sets of numbers (hour and minute). Indicates the time in which the transmitter will reduce power.
To
– followed by two sets of numbers (hour and minute). Indicates the time in which the transmitter will return to the normal power level set via
the menu, as per section 10.3.b.
To set automatic power reduction:
1)
Ensure that the
EDIT
option is selected; otherwise, turn the knob to select it, then press to confirm. A value will be displayed
after
OFF
or
ON
.
2)
Turn the knob to set
OFF
or
ON
according to your requirements, then press to confirm. A value will be indicated after
reduce
.
3)
Turn the knob to change the power reduction percentage, then press to confirm. The first number (hour) will be highlighted
after
from
.
4)
Turn the knob to change the hour in which the power reduction will start (24-hour clock), then press to confirm. The second
number (minutes) will be highlighted after
from
.
5)
Turn the knob to change the minute in which the power reduction will start, then press to confirm. The first number (hour) will
be indicated after
to
.
6)
Repeat steps 4 and 5 to set the time in which the transmitter will return to normal power.
7)
Using the knob, select
OK
to save the settings,
EDIT
to make further changes, or
ABORT
to exit without saving the new
settings, then press to confirm (for further details regarding these commands, see
2
9.4.a).
