Siel EXC-GT Series, User And Maintenance Manual

Page: 36 / 98

EXC-GT – FM super-compact transmitter series
User’s manual – Page 36 of 98
As you can see, the three pages allow you to access the following settings:
š
FREQUENCY – frequency increment steps and operating frequency (
2
10.3.a)
š
POWER – output power level (
2
10.3.b)
š
MPX SENS
– modulation sensitivity (
2
10.3.c)
š
AUX SENS – auxiliary modulation sensitivity, e.g., RDS (
2
10.3.d)
š
LIMITER – maximum deviation limiter (
2
10.3.e)
š
MODE – transmission mode, e.g., stereo/mono and preemphasis (
2
10.3.f)
š
DISPLAY – display backlighting and contrast (
2
10.3.g)
š
SET IN – logic levels for the ENABLE line and related activation mode (
2
10.3.h)
š
SET OUT – logic levels for remote control (
2
10.3.i)
š
DATE TIME – system date and time (
2
10.3.j)
š
PASSWORD
– set passwords (
2
10.3.k)
š
SET ALARM
– alarm identification mode (
2
10.3.l)
š
ETHERNET – Ethernet LAN interface settings (
2
10.3.m)
š
POW TIMER – set automatic power reduction during specific time periods (
2
10.3.n)
š
MODEM – modem modes (
2
10.3.o)
10.3.a FREQUENCY setting
Used to define the transmitter’s operating frequency.
The following parameters can be set:
š
Step – frequency increments can be selected (in the example, 100 KHz)
š
Frequency
– operating frequency
Use of this menu is described in section 8.1.b.
10.3.b POWER setting
Used to adjust the transmitter’s output power.
The display shows the following:
š
Pow. set – set power
š
Pow. out – measurement of the power supplied
Use of this menu is described in section 8.1.c.
10.3.c MPX SENS setting
Used to adjust modulation input sensitivity according to the low frequency level available.