BAL XC420 2.00
25/47
Configuration mode
After starting the software you need to set the configuration mode.
The complete configuration of the display resp. of the gateway is set in mode 'Configuration' or
'Gateway'. Thereby all required parameters are set.
A gateway collects data from data loggers that do not have a network interface and makes that data
available in the network for the display.
With the mode 'Brightness' the luminosity of the display can be modified, all other parameters remain
unchanged. The brightness can be set at a later point of time.
With the mode 'Expert' all individual display systems, resp. special gateway solutions are configured. A
special configuration data file is not needed.
Through the 'slave display' mode, a display can be configured to not receive its data as a standard
display from the data logger, but via a serial connection from the standard display itself.
The standard display and daughter display must have the same display layout.
