BAL XC420 2.00
7/47
2
Important information
Copyright
This documentation is protected by copyright. All rights are reserved.
No part of this documentation may be translated without written permission by Siebert
Industrieelektronik GmbH. No part of this documentation may be reproduced in any form by print,
photocopy or other methods, or processed by using electronic systems, duplicated or disseminated.
Siebert
®
, LRD
®
and XC-Board
®
are registered trade marks of Siebert Industrieelektronik GmbH. As far
as other product names or company names are mentioned in this documentation they may be trade
marks or trade names of their respective owners.
Disclaimer
This documentation has been prepared with utmost care. For any mistakes we can not accept any
liability. Corrections, improvement suggestions, criticism and suggestions are welcome. Please write
to: [email protected]
Liability
Availability and technical specifications of the product are subject to change. The data specified is
indicated solely for product description. They are not intended to be guaranteed in a legal sense.
Cleaning
For the care of the front panel use a scratch-free cloth. Do not push in the front pane during cleaning.
The unit must not be cleaned with a steam cleaner.
Accuracy of the display
If the digital display is connected to a data output unit (inverter, data logger, etc.) via its data interface,
RS485 or Ethernet it is purely an information output unit. It displays the data received via the data
interface in readable digits. For the accuracy of information displayed, however, the data output unit is
responsible. For problems or faulty display the data output unit has to be checked and to observe its
operating instructions.
For problems or damages which are caused by changes of the data output unit (p. e. modified protocol
structure, or modified product characteristics) no liability is assumed.
These operating instructions do not replace the operating instructions of the data output unit.