BAL XC420 2.00
5/47
Qualified staff
The operating instructions are intended for trained professional electricians, familiar with the safety
standards of electrical technology and industrial electronics.
Components inside the unit are voltage-carrying during operation. For this reason mounting and
maintenance work may only be performed by professionally trained personnel while observing the
corresponding safety regulations.
For safety reasons and due to the required compliance with the documented unit properties the repair
and replacement of components and modules may only be carried out by the manufacturer or an
authorized specialized company.
Grounding
The unit is equipped with a metal housing. It complies with safety class I and requires a protective
earth connection. The connecting cable for the operating voltage must contain a protective earth wire
of a sufficient cross section (DIN VDE 0106 part 1, DIN VDE 0411 part 1).
The unit has no power switch. It is in operation immediately after applying operating voltage.
plastic lever
included
Fig.1
connectors 16,5 mm
mm
acrylic glass pane
housing profile
If the connectors once should solve themselves
too easy, then spread them a little bit with a slot
screwdriver.
Fig. 2
connectors 25
mm
acrylic glass pane
housing profile
