SICLI COP3000, Installation Manual, Page: 35 / 45

E
LOOP
OUT
IN
CALL
POINT
ZONE
DETECTOR ZONE
E E E
-
-
- -
+
+ + +
- OUT +
- IN +
- OUT +
- IN +
5K1
5K1
Analogue Addressable Loop
Zone Monitor Unit COPZMU-IS
Installation
1. Separate the two halves of the unit.
2. Drill out (or knock out) the required cable entries in the surface mounting back-
box.
3. Fit the back-box in position and pass the wires into it.
4. Connect the unit according to the diagram below.
Notes:
No addressing of the interface is required. See control panel operation for details.
Standard Connections
Notes:
1.
This unit can only be used with compatible detectors (refer to Sicli).
2. Only connect cable screen to its adjacent earth terminal.
3. The end of line resistor must always be fitted, even if the spur is unused.
4. Maximum number of call points allowed is 30
35
www.acornfiresecurity.com
www.acornfiresecurity.com