b
Click on the gear icon to open the settings and configure parameters, values of
Smart Task blocks or input/output variables.
b
Note that only integer values (0 bis 65,535) are allowed.
b
You can also configure digital outputs. To configure the relevant values, first click
on the selected connection and then on the gear icon.
b
Move the cursor over the inputs to obtain more information about them.
To delete a connection, click on the relevant connection and drag it onto the Trash icon
in the top area using drag and drop.
7
OPERATION
30
O P E R A T I N G I N S T R U C T I O N S | WI180C-IOA00
8025143/2020-01-23 | SICK
Subject to change without notice
