3 D D R I V E R A S S I S TA N C E S Y S T E M | V I S I O N A R Y - B
8022960/2018-07-16| SICK AG
Subject to change without notice
8 9
CONFIGURATION AND OPERATION
IMPORTANT!
Once you have pressed the button there is a short delay before the function is execut-
ed.
DANGER!
Risk of collision due to incorrect configuration.
Incorrect system configuration can result in collisions occurring without prior warning.
•
The values for Estimated and Initial Height/Angle must be slightly different. If these
two values are identical, the sensor head has not been configured correctly and the
alarm will cannot be relied upon to trigger if the alarm zone is breached!
5.
Test the configured values in setup mode and make any necessary adjustments
(see "8.3 Setup mode" on page 90).
6. Check that the image of the vehicle on the display, sensor head position, and
detection zone (shown on the right-hand side of the display) match the settings you
have made.
7. Check that the alarm is triggered when the alarm zone is breached.
Detected objects are displayed as blue dots inside the alarm zone on the display.