Prerequisites
To mount on the machine, the safety switch and actuator must be put together.
Approach
b
Mount the actuator using 2 × M4 screws.
Complementary information
Mounting brackets are available for the actuator and safety locking device as acces‐
sories (
see "Dimensional drawings of the mounting bracket", page 60
).
5.5
Mounting the radius actuator
Important information
NOTICE
The actuator must not be used for guiding or used as a stop.
Prerequisites
•
To mount on the machine, the safety switch and actuator must be put together.
•
The actuator must be positioned perpendicularly to the guide slot before insertion.
Approach
1.
Mount the actuator using 2 × M5 screws.
2.
For larger radii, the actuator can be aligned using the adjustment screw.
Figure 19: Adjustment screw for alignment
1
Adjustment screw
Complementary information
Mounting brackets are available for the actuator and safety locking device as acces‐
sories (
see "Dimensional drawings of the mounting bracket", page 60
).
5.6
Mounting the escape release
Prerequisites
•
Hole in the mounting surface for the escape release (
).
•
Spacers with lengths of 30 mm or 50 mm for the escape release shaft (optional).
5
MOUNTING
26
O P E R A T I N G I N S T R U C T I O N S | TR110 Lock
8023119/15LY/2019-10-28 | SICK
Subject to change without notice