![background image](http://html.mh-extra.com/html/sick/tr10-lock/tr10-lock_operating-instructions-manual_1264350019.webp)
Figure 12: Correct and incorrect screw connection options for the mounting bracket
Mounting the safety switch
b
Mount the safety switch with 3 M5 screws. You can ensure correct alignment of
the safety switch and actuator in two ways.
°
Use supplied alignment aid.
Figure 13: Alignment of safety switch and actuator, variant 1
°
Use 6.5 mm for distance “H”.
H
Figure 14: Alignment of safety switch and actuator, variant 2
DANGER
Hazard due to lack of effectiveness of the protective device
In the case of non-compliance, it is possible that the dangerous state of the machine
may not be stopped or not stopped in a timely manner.
b
After mounting, make sure that the actuator cannot be raised above the extended
guard locking pin.
b
After mounting, make sure that the safety switch and actuator do not collide when
opening or closing.
MOUNTING
5
8019972/2016-07-19 | SICK
O P E R A T I N G I N S T R U C T I O N S | TR10 Lock
19
Subject to change without notice