2
Safety information
2.1
Intended use
The TMS/TMM88 and TMS/TMM61 inclination sensors are measuring devices consist‐
ing of an electronic sensor and integrated evaluation electronics. The tasks for which
the measuring devices are designed include recording inclinations in solar thermal
energy, photovoltaics or heavy-duty vehicle applications.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.2
Incorrect use
TMS/TMM88 and TMS/TMM61 inclination sensors do not constitute safety compo‐
nents in accordance with the EC Machinery Directive (2006/42/EC). The inclination
sensors must not be used in explosion-hazardous areas. Any other use that is not
described as intended use is prohibited. Any use of accessories not specifically
approved by SICK AG is at your own risk.
WARNING
Danger due to improper use!
Any incorrect use can result in dangerous situations.
Therefore, take note of the following information:
■
Inclination sensors should be used only according to intended use specifications.
■
All information in these operating instructions must be strictly complied with.
2.3
Requirements for the qualification of personnel
The personnel who work on and with the device must be suitably authorized, trained,
and sufficiently qualified. Skilled personnel refers to the following:
•
A member of staff who has received specialist training, which is backed up by
additional knowledge and experience.
•
A member of staff who knows the relevant technical terms and regulations.
•
A member of staff who can appraise the work assigned to them, recognize poten‐
tial hazards, and take suitable safety precautions.
Table 1: Skilled personnel qualifications
Task
Qualification
Mounting
•
Technical training
•
Knowledge of current workplace safety regulations
Electrical installation
•
Electrotechnical training
•
Knowledge of the current electrotechnical workplace safety
regulations
•
Knowledge of the operation and control of the sensor in the
particular application
Commissioning, configura‐
tion, and operation
•
Technical training
•
Knowledge of the operation and control of the sensor in the
particular application
SAFETY INFORMATION
2
OPERATING INSTRUCTIONS
| TMS/TMM88, TMS/TMM61
5
8019054/14IT/2019-06-27
| SICK
Subject to change without notice
