NOTICE
Do not switch on the supply voltage for the TiM2xx until the connection work has been
completed and the wiring work has been checked carefully.
NOTE
To ensure that the device conforms with the CE standard, do not use connection cables
longer than 10 m (32,8 ft).
Electrical block diagram
for an overview of the electrical interfaces for the device.
SOPAS
SOPAS
Power/Out
5
Configuration
1
Diagnosis
2
TiM
Connection
box
7
Driver for request of
measurement values
and further data
processing
3
Device Ready
6
Ethernet
4
Ethernet
Ethernet
DC 10 V ... 28 V
Delay-
action
fuse
0,8 A/T
8
Figure 8: Electrical block diagram for operation
1
Configuration
2
Diagnosis
3
Driver for request of measurement values and further data processing
4
Ethernet
5
Power/Out
6
Device Ready
7
Connection box
8
Delay-action fuse 0,8 A/T
6.5
Pin assignment
NOTICE
Do not connect reserved pins.
Power/Out connector
1
2
4
3
5
Figure 9: Power/Out connector (M12 male connector, 5-pin, A-coded)
Pin
Signal
Description
1
DC, 10 V ... 28 V
Supply voltage V
S
ELECTRICAL INSTALLATION
6
8025019/190A/2020-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | TiM2xx
21
Subject to change without notice
